Connecting Monitor Speakers - Yamaha disklavier DKC-850 Operation Manual

Chapter
2
Getting Started

Connecting Monitor Speakers

To listen to the internal XG tone generator voices, you have to connect
monitor speakers. Connection methods vary depending on whether your
piano is equipped with the Silent Piano™ function or not.
■ For Pianos Equipped with the Silent Piano™
Function
Connect the AUX IN jacks of your piano to the OUTPUT jacks on the rear
of the Disklavier control unit with the supplied audio cable.
For models with the control box
Connect with the supplied audio
cable (pin plugs – stereo mini plug).
Disklavier
control unit
■ For Pianos Not Equipped with the Silent Piano™
Function
Connect the input jacks of monitor speakers (phone jacks) to the OUTPUT
jacks on the rear of the Disklavier control unit with the supplied audio
cables (pin plug – phone plug).
Monitor
speaker (left)
POWER
ON
OFF
Audio cable
(supplied)
Disklavier
control unit
12
For models with the amplifier
Connect with the supplied audio
cables (pin plug – phone plug).
To AUX IN jack
(stereo mini plug)
Audio cable
(supplied)
Disklavier
control unit
AC wall outlet
Monitor
speaker (right)
POWER
ON
OFF
POWER
INPUT
ON
LINE 1
(--10dB)
OFF
LINE 2
(--4dB)
PARALLEL PARALLEL
Audio cable
(supplied)
To AUX IN jacks
(phone plug)
Audio cables
(supplied)
INPUT
LINE 1
(--10dB)
LINE 2
(--4dB)
Note:
The shape of units or the location of
the AUX IN jacks varies depending
on the piano model.