DKC-850 INTERNET CONNECTION GUIDE
*He re , "m ode m " re fe rs to an ADSL m o de m , optica l ne twork unit (O NU),
or cable m ode m .
To your Disklavier
Still can't connect? Follow these instructions...
Yamaha: Connect to Radio Service For ...
Wireless bridge device
Any LAN bridge compatible with your network should allow you to
connect your instrument wirelessly. However, the following devices
have been fully tested and are recommended for use with Yamaha
You may need to refer to the manufacturer's instructions to
configure your adapter. A full list of compatible adapters is available
Set up your adapter to connect to your wireless network, following
the directions provided for your adapter. If you have any problems
connecting the bridge device to your network, please contact the
device manufacturer for further support.
Attach one end of an Ethernet cable to the rear port of the bridge
adapter and the other end to the Ethernet port on your Disklavier.
Press the [Internet] button on your remote. Congratulations, you
are now connnected. You should see the Internet Direct Connection