Setting The Type Of Your Piano - Yamaha disklavier DKC-850 Operation Manual

Operation manual
Hide thumbs Also See for disklavier DKC-850:
Table of Contents

Advertisement

Setting the Type of Your Piano

[SYSTEM]
"PianoType"
After you have connected the Disklavier control unit to your piano, you
must set the type of your piano.
1
Press [SYSTEM] on the remote control.
The system menu screen appears.
=SYSTEM MENU=
Clock Adj.
Backup
2
Select "PianoType" with the cursor buttons ([
[
]), then press [ENTER].
The piano type setup screen appears.
3
Press [+/YES] and [–/NO] to change the connection type
setting.
=PianoType=
Type=Add
The following connection type settings are available:
Setting
Description
Replace
Select this when you replaced the existing unit with
the Disklavier control unit (see page 8).
Add
Select this when you connected the Disklavier
control unit to your piano with the MIDI cables (see
page 10).
(1/2)
TimeZone
Restore
=SYSTEM MENU=
(2/2)
_
*Language
*PianoType
*Display
=PianoType=
-+ENT
Type=Replace
Piano=REC
-+ENT
] [
] [
]
Note:
If you select "Replace" and this unit
detects your piano as the playback
model, "[PB]" appears on the right
of the screen.
Chapter
2
Getting Started
15

Advertisement

Table of Contents
loading

Table of Contents