Rear Panel - Yamaha disklavier DKC-850 Operation Manual

■ Rear Panel

1
7
1 USB TO DEVICE port
Used to connect a USB flash memory, an optional
USB floppy disk drive, etc.
2 LAN port
Used to connect to the Internet.
3 OUTPUT jacks
Used to connect the speaker cord from optional
monitor speakers.
ANALOG MIDI IN jacks
4
Used to connect the audio equipment such as an
external CD changer.
OMNI (SYNC) OUT jacks
5
Used to connect the microphone/line input of a
camcorder.
OMNI (SYNC) IN jacks
6
Used to connect the audio output of a camcorder.
TO PIANO connectors
7
Used to connect the piano.
DC-IN 12V connector
8
Used to connect to the supplied AC adaptor.
USB TO HOST port
9
Used to connect the USB cable from a computer.
2 3
8 9
4 5 6
10 11
10 MIDI OUT terminal
For models to be replaced with Disklavier control
unit:
Used to connect external MIDI equipment.
For models to be connected with the MIDI cables:
Used to connect the existing control unit.
11 MIDI IN terminal
For models to be replaced with Disklavier control
unit:
Used to connect external MIDI equipment.
For models to be connected with the MIDI cables:
Used to connect the existing control unit.
Chapter
1
Introduction
3