DKC-850 INTERNET CONNECTION GUIDE
With Router Function
To your modem or
To your Disklavier
Still can't connect? Follow these instructions...
Yamaha: Connect to Radio Service For ...
Without Router Function
Modem (with router function)
Modem (without router function)
Other device (such as computer)
I/O Center (right side)
To set up the connection, attach one end of the Ethernet cable to a
free port on your modem or router.
Attach the other end of the cable to the Ethernet port on your
Disklavier. The location of the port is shown here.
Press the [Internet] button. Congratulations, you are now
connnected. You should see the Internet Direct Connection home
If you see a screen saying that you are not successfully connected,
you may need to set up your instrument to connect to your
network. To do so, press [Setup], then [Network] from your remote
On the network screen, you can update your DHCP, DNS, Proxy and
manual IP settings. In most cases you will not need to edit these
Unless you are manually assigning DNS or IP locations for your