Cd Synchronized Recording - Yamaha disklavier DKC-850 Operation Manual

CD Synchronization
Chapter
10
You can record a piano performance along with the playback of songs on commercially
available CDs. Once you record a song with this feature, later on, you can enjoy piano
playback along with the played back songs on the CD.

CD Synchronized Recording

Insert an audio CD [RECORD]
You can record a Disklavier piano performance along with the playback of
songs on commercial CDs.
1
Select a destination medium and album, then song in the
selected album.
2
Insert an audio CD and select the song that you want to
synchronize with.
3
Press [RECORD].
The SPS recording standby screen appears, and [RECORD] on the
front panel lights red, and [PLAY/PAUSE] flashes in green.
4
Select the desired part of a song, then press [PLAY] to
start synchronizing.
Recording begins with the CD playback.
5
Start playing the Disklavier along with the CD playback.
6
Press [STOP] to stop recording.
The recorded song is loaded.
76
=Memory=(SPS) LR 99%
(New Song)
A01-038
<00:00>
Note:
The Disklavier control unit
recognizes the destination album by
selecting the song in it. Note that the
selected song is not overwritten by
this procedure.

To select a medium and album, see
Chapter 3 "Basic Song Playback –
Selecting Medium and Their
Contents" on page 22.

To play back the performance
recorded with this feature, see
Chapter 10 "CD Synchronization –
Adding Disklavier Accompaniment
to Commercial CD Songs
(PianoSmart™ Playback)" on
page 77.