Updating the Disklavier Downloading the Update Program You can download the update program in one of two ways. ■ Downloading the Update Program Directly from the Internet Press [INTERNET] on the remote control. The Internet menu screen appears. =Internet= (1/1) D-Radio MyAccount Update...
The USB flash memory that you use must have a MINIMUM of 20.0 MB of space to copy the update program. Download the update program from Yamaha website. Note: Copy the update program you have downloaded to the Copy the update program to the root USB flash memory.
Page 4
Updating the Disklavier Insert the USB flash memory including the update program into the USB port of the control unit. USB flash memory USB port The update program is ready to be installed. Update the firmware following the procedures in “Updating the Disklavier”...
Page 5
Updating the Disklavier Important: Press [PLAY/PAUSE] to start the update. DO NOT turn off this unit during update. The update process of the first module takes approximately 3 Important: minutes. Be sure to update all the modules. MC v2.20 v3.00 DO NOT REMOVE DISK! When the update of the first module completes, the following...