Brother DCP 585CW - Color Inkjet - All-in-One User Manual page 77
Multiprotocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for DCP 585CW - Color Inkjet - All-in-One:
- Guia del usuario en red manual (196 pages) ,
- Guía de configuración rápida (43 pages) ,
- User manual (256 pages)
Table of Contents
Advertisement
Wireless Configuration for Macintosh
i
Confirm the on-screen message and click Next.
j
Press Menu, a or b to choose Network and press OK. Press a or b to choose WLAN and then press OK.
Press a or b to choose SES/WPS/AOSS and press OK.
(For Touchscreen models)
Press MENU. Press Network. Press WLAN and then press SES/WPS/AOSS.
Note
If your wireless access point supports Wi-Fi Protected Setup™ (PIN Method) and you want to configure
your machine using the PIN (Personal Identification Number) Method, see Using the PIN Method of Wi-Fi
Protected Setup™ on page 35.
k
The machine searches for an access point that supports SecureEasySetup™, Wi-Fi Protected Setup™
or AOSS™ for 2 minutes.
l
Put your access point in the SecureEasySetup™ mode, Wi-Fi Protected Setup™ mode or AOSS™
mode, depending on what is supported by your access point. Please refer to the instruction manual that
came with your access point.
®
using the Brother installer application (Not available for MFC-5490CN and MFC-5890CN)
5
5
67
Advertisement
Table of Contents
Troubleshooting
