®
For Windows
The Firewall on your computer may be blocking the necessary network connection to the machine. In this
case, you will need to disable the Firewall on your computer and re-install the drivers.
®
Windows
XP SP2 users:
a
Click the Start button, Control Panel, Network and Internet Connections.
b
Double-click Windows Firewall.
c
Click the General tab. Make sure that Off (not recommended) is selected.
d
Click OK.
Note
After the Brother software package is installed, re-enable your Firewall.
®
Windows Vista
users:
a
Click the
button, Control Panel, Network and Internet, Windows Firewall and click
Change settings.
b
When the User Account Control screen appears, do the following.
Users who have administrator rights: Click Continue.
For users who do not have administrator rights: Enter the administrator password and click OK.
c
Click the General tab. Make sure that Off (not recommended) is selected.
d
Click OK.
Note
After the Brother software package is installed, re-enable your Firewall.
®
For Macintosh
Re-select your machine in the Device Selector application located in
Macintosh HD/Library/Printers/Brother/Utilities/DeviceSelector or from the model pull-down list of
ControlCenter2.
Troubleshooting
13
13
13
156