Restoring The Network Settings To Factory Default - Brother DCP 585CW - Color Inkjet - All-in-One User Manual

Restoring the network settings to factory default

If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
Note
This function restores all wired and wireless network settings to the factory default.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose Factory Reset.
Press OK.
d
Press 1 for Factory Reset.
e
Press 1 for Reboot.
Note
For DCP models, press + for Factory Reset and then press + for Reboot.
f
The machine will re-start. You can now reconnect the network cable and configure the network settings
to work with your network.
For MFC-5490CN
a
Press Menu, 5, 0.
b
Press 1 for Factory Reset.
c
Press 1 for Reboot.
d
Press Stop/Exit.
For Touchscreen models
a
Press MENU.
b
Press Network.
c
Press a or b to display Factory Reset and then press Factory Reset.
d
Press Yes.
e
Press Yes for 2 seconds to confirm.
Control panel setup
6
6
6
6
124