Step By Step Chart For Wireless Network Configuration; For Infrastructure Mode - Brother DCP 585CW - Color Inkjet - All-in-One User Manual

Step by step chart for wireless network configuration

For Infrastructure mode

a
Confirm your network environment. (See page 23.)
Infrastructure mode
Connected to a computer with an access point
b
Confirm your wireless network setup method. (See page 24.)
Using the Setup
Wizard from the SES/WPS/AOSS
control panel
(Recommended)
c
Configure your machine for a wireless network. (See page 27.)
See page 27.
Installing drivers and software (See the Quick Setup Guide.)
Wireless configuration and installing drivers and software have been completed.
Configuring your machine for a wireless network (Not available for MFC-5490CN and MFC-5890CN)
Using the Using the PIN
Method of Wi-Fi
control panel
menu
See page 31. See page 35.
Ad-hoc mode
or
Connected to a wireless capable computer
without an access point
Protected
Setup™
Temporarily using
a network cable
For Windows
(See page 38.)
For Macintosh
(See page 58.)
See page 22.
Using the Brother
installer
application
Using the
SES/WPS/AOSS
control panel
menu
®
For Windows
(See page 45.)
®
For Macintosh
(See page 65.)
3
3
3
®
®
21