Product Faq; What Is Shdsl, Shdsl.bis; How Can I Manage P-791R V2; What Is The Default Password For Web Configurator - ZyXEL Communications P-791R V2 Support Notes

G.shdsl.bis router

Hide thumbs Also See for P-791R V2:

Table of Contents

Product FAQ

SHDSL stands for Symmetric High-data-rate Digital Subscriber Line. SHDSL

bases on TC-PAM (Trellis Coded Pulse Amplitude Modulation) which offers

symmetrical transmission speed up to 2.30 Mbps (2-wire mode).

SHDSL.bis boots SHDSL performance to approximately 5.70 Mbps (2-wire

mode) or 11.4 Mbps (4-wire mode).

Note: P-791R v2 only support 2-wire mode.

Multilingual Embedded Web GUI for Local and Remote management

SMT via console.

Telnet support (Administrator Password Protected ) for remote

configuration change and status monitoring

FTP/ TFTP sever, firmware upgrade and configuration backup and

restore are supported(Administrator Password Protected)

There are two different accounts for P-791R v2 Web Configurator: Common

User Account and Administrator Account.

By factory default the password for the two accounts are:

• Common User Account: user

• Administrator Account: 1234.

You can change the password after you logging in the Web Configurator.

Note: By default, the password is "user".

4. What's the difference between 'Common User Account' and

'Administrator Account'?

For Common User Account, it can only access the status monitor of P-791R v2

and check the current system status.

For Administrator Account, besides accessing the status monitor of P-791R v2,

it can also access Winzard setup / Advanced setup of P-791R v2.

P-791R v2 Support Notes

Table of Contents