Using Full Feature Nat - ZyXEL Communications P-791R V2 Support Notes

P-791R v2 Support Notes
Before making a VPN connection from the Win9x client to the NT server, you
need to know the exact Internet IP address that the ISP assigns to P-791R v2
router in SUA mode and enter this IP address in the VPN dial-up dialog box.
You can check this Internet IP address from PNC Monitor or Web Configurator,
Status -> Device Information->WAN Information. If the Internet IP address
is a fixed IP address provided by ISP in SUA mode, then you can always use
this IP address for reaching the VPN server.
In the following example, the IP address '140.113.1.225' is dynamically
assigned by ISP. You must enter this IP address in the 'VPN Server' dialog box
for reaching the PPTP server. After the VPN link is established, you can start
the network protocol application such as IP, IPX and NetBEUI.

8. Using Full Feature NAT

When P-791R v2 is in Routing mode, you can select NAT Option as Full
Feature in Network -> NAT ->General
38
All contents copyright © 2007 ZyXEL Communications Corporation.