Product Specifications - ZyXEL Communications P-320W v3 User Manual

C
H A P T E R
The following tables summarize the P-320W v3's hardware and firmware features.
Table 83 Hardware Features
Dimensions (W x D x
H)
Weight
Power Specification
Ethernet ports
4-5 Port Switch
LEDs
Reset Button
Antenna
Operation
Environment
Storage Environment
P-320W v3 User's Guide

Product Specifications

162 x 115 x 33 mm
248 g
Input: 120~240 AC, 50~60 Hz
Output: 5 V AC 1 A
Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or
full-duplex mode.
Auto-crossover: Use either crossover or straight-through Ethernet
cables.
A combination of switch and router makes your P-320W v3 a cost-
effective and viable network solution. You can add up to four
computers to the P-320W v3 without the cost of a hub when
connecting to the Internet through the WAN port. You can add up
to five computers to the P-320W v3 when you connect to the
Internet in AP mode. Add more than four computers to your LAN
by using a hub.
PWR, LAN1-4, WAN, WLAN, WPS
The reset button is built into the rear panel. Use this button to
restore the P-320W v3 to its factory default settings. Press for 1
second to restart the device. Press for 5 seconds to restore to
factory default settings.
The P-320W v3 is equipped with a 2dBi detachable antenna to
provide clear radio transmission and reception on the wireless
network.
Temperature: 0º C ~ 40º C
Humidity: 20% ~ 80% RH (Non-condensing)
Temperature: -20º C ~ 70º C
Humidity: 20% ~ 90% RH (Non-condensing)
21
193