Ftp - ZyXEL Communications P-791R V2 Support Notes

G.shdsl.bis router

Hide thumbs Also See for P-791R V2:

Table of Contents

3. Firmware/Configurations Uploading and

Downloading using FTP

In addition to upload the firmware and configuration file via the console port

and TFTP client, you can also upload the firmware and configuration files to

the P-791R v2 using FTP.

To use this feature, your workstation must have a FTP client software. See the

example shown below.

• Using FTP client software

Note: The remote file name for the firmware is 'ras' and the configuration

file is 'rom-0'.

Use FTP client from your workstation to connect to the P-791R v2 by

Step 1

entering the IP address of the P-791R v2.

Press 'Enter' key to ignore the username, because the P-791R v2

Step2

does not check the username.

Enter the CLI password as the FTP login password, the default is

Step 3

'admin'.

Step 4 Enter command 'bin' to set the transfer type to binary.

Step 5 Use 'put' command to transfer the file to the P-791R v2.

Example:

Step 1: Connect to the P-791R v2 by entering the P-791R v2's IP and

Administrator password in the FTP software. Set the transfer type to

'Auto-Detect' or 'Binary'.

P-791R v2 Support Notes

Table of Contents