ZyXEL Communications P-791R V2 Support Notes page 71

Step 2: Type the command 'sys stdio 0' to disable console idle timeout in
Command Line Interface (CLI).
Step 3: Run the TFTP client software
Step 4: To download the P-791R v2 configuration, please get the remote
file 'rom-0' from the P-791R v2.
Step 5: To upload the P-791R v2configuration, please save the remote file
as 'rom-0' in the P-791R v2.
Example:
The 192.168.1.1 is the IP address of the P-791R v2.
The local file is the source file of your configuration file that is available
in your hard disk.
The remote file is the file name that will be saved in P-791R v2.
Check the port number 69 and 512-Octet blocks for TFTP.
Check 'Binary' mode for file transfering.
Using TFTP command on Windows NT
Step 1: TELNET to your P-791R v2 first before using TFTP command
Step 2: Type the CI command 'sys stdio 0' to disable console idle timeout in
Command Line Interface (CLI).
Step 3: Download ZyNOS via LAN :
Step 4: Upload P-791R v2 configurations via LAN:
[localfile] rom-0
Step 5: Download P-791R v2 configurations via LAN:
rom-0 [localfile]
Using TFTP command on UNIX
Before you begin:
a) TELNET to your P-791R v2 first before using TFTP command
All contents copyright © 2007 ZyXEL Communications Corporation.
P-791R v2 Support Notes
c:\tftp -i [P-791R v2IP] get ras [localfile]
c:\tftp -i [P-791R v2 IP] put
c:\tftp -i [P-791R v2 IP] get
71