ZyXEL Communications P-791R V2 Support Notes page 81

10 * Echo-Reply
11 * Discard-Request
12 * Identification
13 * Time-Remaining
14 + Reset-Request [RFC1962]
15 + Reset-Reply [RFC1962]
* LCP Only
+ CCP Only
•
PPP LCP CONFIGURATION OPTION TYPES
The Point-to-Point Protocol (PPP) Link Control Protocol (LCP) specifies
a number of Configuration Options which are distinguished by an 8 bit
Type field. These Types are assigned as follows:
Type Configuration Option
--------------------------------------------------------------
0 Vendor Specific [RFC2153]
1 Maximum-Receive-Unit
2 Async-Control-Character-Map
3 Authentication-Protocol
4 Quality-Protocol
5 Magic-Number
6 DEPRECATED (Quality-Protocol)
7 Protocol-Field-Compression
8 Address-and-Control-Field-Compression
9 FCS-Alternatives [RFC1570]
10 Self-Describing-Pad [RFC1570]
11 Numbered-Mode [RFC1663]
12 DEPRECATED (Multi-Link-Procedure)
13 Callback [RFC1570]
14 DEPRECATED (Connect-Time)
15 DEPRECATED (Compound-Frames)
16 DEPRECATED (Nominal-Data-Encapsulation)
17 Multilink-MRRU [RFC1717]
18 Multilink-Short-Sequence-Number-Header [RFC1717]
19 Multilink-Endpoint-Discriminator [RFC1717]
20 Proprietary [KEN]
21 DCE-Identifier [SCHNEIDER]
22 Multi-Link-Plus-Procedure [Smith]
23 Link Discriminator for BACP [RFC2125]
24 LCP-Authentication-Option [ Culbert]
25 Consistent Overhead Byte Stuffing (COBS) [Carlson]
All contents copyright © 2007 ZyXEL Communications Corporation.
P-791R v2 Support Notes
81