ZyXEL Communications P-791R V2 Support Notes page 57

setting. For example, if Start Date is 2000/10/02(Monday), but Monday
setting in weekday can be No.
The node will always keep up during the setting period. It is equivalent
Forced On
to diable the idel timeout.
The node will always keep doen during the setting period. The
Forced Down
connected remote node will be dropped.
Enable
The remote node accepts Dial-on-demand during this period.
Dial-On-Demand
The remote node denies any demand dial during the period. For the
Disable
existing connected nodes, it will be dropped after idle timeout and no
Dial-On-Demand
triggered up.
Start Time/
Start Time and Duration of this schedule
Duration
•
Apply the schedule to the Remote node
Multiple scheduling rules can program in a Remote node, and they have
priority. For example, if we program the sets as 1,2,3,4 in remote node, then
the set 1 will override set 2,3,4. set 2 will override 3,4, and so on.
We can apply the schedule to the remote node in SMT menu 11.1.
For example, if we want to apply the call schedule set 1 to remote node 1, we
could set:
Rem Node Name= MyISP
Active= Yes
Encapsulation= PPPoE
Multiplexing= LLC-based
Service Name=
Incoming:
Rem Login=
Rem Password= ********
Outgoing:
My Login= user
My Password= ********
Authen= CHAP/PAP
• Time Service in P-791R v2
There is no RTC (Real-Time Clock) chip so the P-791R v2 hould launch a
mechanism to get current time and date from external server in boot time.
All contents copyright © 2007 ZyXEL Communications Corporation.
Menu 11.1 - Remote Node Profile
P-791R v2 Support Notes
.
Route= IP
Bridge= No
Edit IP/Bridge= No
Edit ATM Options= No
Edit Advance Options= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedule Sets= 1
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 0
57