ZyXEL Communications P-791R V2 Support Notes page 50

• Configure the P-791R v2 for SNMP
The SNMP related settings in P-791R v2are configured in Web Configurator,
Advanced Setup, Advanced -> Remote MGNT -> SNMP The following steps
describe a simple setup procedure for configuring all SNMP settings.
Key Settings:
Option Descriptions
Enter the correct Get Community. This Get Community must match the
Get
'Get-' and 'GetNext' community requested from the NMS. The default is
Community
'public'.
Set Enter the correct Set Community. This Set Community must match the
Community
'Set-community requested from the NMS. The default is 'public'.
Enter the IP address of the NMS. The P-791R v2 will only respond to
Trusted
SNMP messages coming from this IP address. If 0.0.0.0 is entered, the
Host
P-791R v2 will respond to all NMS managers.
All contents copyright © 2007 ZyXEL Communications Corporation.
P-791R v2 Support Notes
50