ZyXEL Communications P-791R V2 Support Notes page 44

G.shdsl.bis router

Hide thumbs Also See for P-791R V2:

Table of Contents

P-791R v2 Support Notes

Step 1: In this case, we need to map ILA to more than one IGA, therefore we

must choose the Full Feature option from the NAT field in currently active

remote node, and assign IGA3 to P-791R v2's WAN IP Address.

Step 2: Go to Web Configurator, Advanced Setup, Network -> NAT ->

Address Mapping to begin configuring Address Mapping Set #1. We can see

there are 10 blank rule table that could be configured. See the following setup

for the four rules in our case.

Rule 1 Setup: Select One-to-One type to map the FTP Server 1 with ILA1

(192.168.1.10) to IGA1 (200.0.0.1).

Rule 2 Setup: Selecting One-to-One type to map the FTP Server 2 with ILA2

(192.168.1.11) to IGA2 (200.0.0.2).

Rule 3 Setup: Select Many-to-One type to map the other clients to IGA3

(200.0.0.3).

Table of Contents