Using Syslog; Using Ip Alias - ZyXEL Communications P-791R V2 Support Notes

Enter the community name in each sent trap to the NMS. This Trap
Trap
Community must match what the NMS is expecting. The default is
Community
'public'.
Enter the IP address of the NMS that you wish to send the traps to. If
Trap
0.0.0.0 is entered, the P-791R v2 will not send trap any NMS
Destination
manager.

11. Using syslog

You can configure it in Web Configurator, Advanced Setup, Maintenance ->
Logs -> Log Settings -> Syslog logging.
Key Settings:
Active: Select it to active UNIX Syslog.
Syslog IP Address: Enter the IP address of the UNIX server that you wish to
send the syslog.
Log Facility: Select from the 7 different local options. The log facility lets you
log the message in different server files. Refer to your UNIX manual.

12. Using IP Alias

• What is IP Alias?
In a typical environment, a LAN router is required to connect two local
networks. The P-791R v2 can connect three local networks to the ISP or a
remote node, we call this function as 'IP Alias'. In this case, an internal router
is not required. For example, the network manager can divide the local
network into three networks and connect them to the Internet using P-791R
v2's single user account. See the figure below.
All contents copyright © 2007 ZyXEL Communications Corporation.
P-791R v2 Support Notes
51