ZyXEL Communications P-791R V2 Support Notes page 32

(2) Because White Pine Cu-SeeMe uses dedicate ports (port 7648 & port
24032) to transmit and receive data, therefore only one local
Cu-SeeMe is allowed within the same LAN.
(3) In SUA mode, only one local NetMeeting user is allowed because the
outsiders can not distinguish between local users using the same
internet IP.
(4) Certain Quake servers do not allow multiple users to login using the
same unique IP, so only one Quake user will be allowed in this case.
Moreover, when a Quake server is configured behind SUA, P-791R v2
will not be able to provide information of that server on the internet.
(5) Quake II has the same limitations as that of Quake I.
(6) P-791R v2 supports MSN Messenger 7.0 or above video/ voice
pass-through NAT In addition, for the Windows OS supported UPnP
(Universal Plug and Play), such as Windows XP and Windows ME,
UPnP supported in P-791R v2 is an alternative solution to pass through
MSN Messenger video/ voice traffic. For more detail, please refer to
UPnP application note.
(7) P-791R v2 supports Microsoft Xbox Live with factory default
configuration.
Configurations
For example, if the workstation operating Cu-SeeMe has an IP of 192.168.1.34,
then the default SUA server must be set to 192.168.1.34. The peer Cu-SeeMe
user can reach this workstation by using P-791R v2's WAN IP address which
can be obtained from Web Configurator, Status ->Device Information->WAN
Information
Configure an Internal Server behind SUA
All contents copyright © 2007 ZyXEL Communications Corporation.
P-791R v2 Support Notes
32