Removing The Shelf Supports - Electrolux EOU5410BAK User Manual

• Clean stubborn dirt with a special oven
cleaner.
• Clean all oven accessories (with a soft
cloth with warm water and cleaning
agent) after each use and let them dry.
• If you have nonstick accessories, do
not clean them using an aggressive
agents, sharp edged objects or dish-
washer. It can destroy nonstick coating!
Stainless steel or aluminium
appliances:
Clean the oven door with a wet
sponge only. Dry it with a soft
cloth.
Do not use steel wool, acids or
abrasive materials as they can
damage the oven surface. Clean
the oven control panel with the
same precautions
9.1 Catalytic walls
The walls with a catalytic coating are self-
cleaning. They absorb fat which collects
on walls while the oven operates.
To support this self-cleaning process
heat the oven without any food
regularly:
1. Open the oven door.

Removing the shelf supports

2. Remove all accessories from the
oven.
3. Close the door.
4. Set the maximum oven temperature
and let the oven operate for 1 hour.
5.
Clean the oven cavity with a soft and
damp sponge.
CAUTION!
Do not attempt to clean catalytic
surfaces with oven sprays, abra-
sive cleaners, soap or other clean-
ing agents. This may damage the
catalytic surface.
Discolouration of the catalytic sur-
face has no effect on catalytic
properties.
9.2 Shelf supports
You can remove the shelf supports to
clean the side walls.
1. Pull the front of the shelf support
away from the side wall.
ENGLISH 17