Shelf Supports; Removing The Shelf Supports - Electrolux EOC5956AA User Manual

• To clean metal surfaces, use a usual
cleaning agent.
• Clean the appliance interior after each
use. Then you can remove dirt more
easily and it does not burn on.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all accessories after each use
and let them dry. Use a soft cloth with
warm water and a cleaning agent.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a dish-
washer. It can cause damage to the
nonstick coating.
12.1 Pyrolytic cleaning
Menu / Heating Functions / Cleaning
You can clean the appliance using pyroly-
sis with the function : Pyrolytic .
WARNING!
The appliance becomes very hot.
There is the risk of burns.
Remove the accessories from the
appliance before you start the
cleaning procedure.

12.2 Shelf supports

Removing the shelf supports

1. To set the cleaning mode scroll
through the menu: Cleaning .
– Quick Pyrolysis - for a low level of
dirt (1 h)
– Normal Pyrolysis - for a medium
level of dirt (1 h 30 min)
– Intense Pyrolysis - for a high level
of dirt (2 h 30 min)
2. To activate the cleaning mode just
touch the one you want to choose.
When the pyrolytic cycle starts,
the lamp does not work and the
cooling fan works at a higher
speed.
Do not open the door during the heating
up time. If you open the door, you will
cancel the pyrolytic cleaning cycle.
To stop the pyrolytic cleaning cycle,
touch: .
Do not use the appliance until the door
lock symbol is off.
You can remove the shelf supports to
clean the side walls.
1. Pull the front of the shelf support
away from the side wall.
ENGLISH 41