Oven Lamp; What To Do If - Electrolux EOU5410BAK User Manual

Installing the door and the glass
panels
When the cleaning is completed, install
the glass panels and the oven door. Do
the above steps in the opposite se-
quence. Install the smaller panel first, then
the larger.

9.4 Oven lamp

WARNING!
There is a danger of electrical
shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or
switch off the circuit breaker.

10. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The oven lamp does not
operate.
The display shows 12.00
Problem
8. Hold the door glass panels on their
top edge one by one and pull them
upwards out of the guide
9.
Clean the glass panel with water and
soap. Dry the glass panel carefully.
Replacing the oven lamp
1.
2.
3.
4.
Possible cause
The appliance is deacti-
vated.
The clock is not set.
The necessary settings
are not set.
The fuse in the fuse box
is released.
The oven lamp is defec-
tive.
There was a power cut.
Put a cloth on the bottom of the
oven for protection of the oven
light and glass cover.
You can find the lamp glass cover at
the back of the cavity.
Turn the lamp glass cover counter-
clockwise to remove it.
Clean the glass cover.
Replace the oven lamp with applica-
ble 300°C heat-resistant oven lamp.
Use the same oven lamp type.
Install the glass cover.
Remedy
Activate the appliance.
Set the clock.
Make sure that the set-
tings are correct.
Do a check of the fuse. If
the fuse is released more
than one time, contact a
qualified electrician.
Replace the oven lamp.
Set the clock.
ENGLISH 19