Adjusting The Projector Function ("Prj - Adj" Menu); Auto Search Function; Auto Sync (Auto Sync Adjustment) - Eiki EIP-1000T Owner's Manual

Adjusting the Projector Function ("PRJ - ADJ" menu)

1 Auto Search Function

1 1
1 1
This function automatically searches for and
switches to the input mode in which signals are
being received, when the projector is turned on,
or when the INPUT button is pressed.
Note
When "Auto Search" is set to "On"
• If two or more input signals are found, the pro-
jector selects the input source in the order of
INPUT 1 n INPUT 2 n INPUT 3 n INPUT 4
when you press INPUT (P/R) on the projec-
tor.
• While "Auto Search" is set to "On", press
C INPUT 1,C INPUT 2, D INPUT 3 or
EINPUT 4 on the remote control to select
an input mode other than the input mode se-
lected by the projector.
44
Picture SCR - ADJ PRJ - ADJ
Auto Search
Auto Sync
Auto Power Off
System Sound
Speaker
RS-232C
Fan Mode
Lamp Timer(Life)
SEL./ADJ. ENTER
Serviceman only
*
On
Off
• Auto Sync adjustment is also performed by
• The Auto Sync adjustment may take some time
• When the optimum image cannot be achieved
Menu operation n Page 39
Help
Off
On
On
Off
On
9600 bps
Normal
0 h 100%
END
2 Auto Sync (Auto Sync
2 2
2 2
Adjustment)
Selectable items
Auto Sync adjustment will
occur when the projector is
turned on or when the input
signals are switched, when
connected to a computer.
Auto Sync adjustment is not
automatically performed.
Note
pressing F AUTO SYNC on the remote con-
trol.
to complete, depending on the image of the
computer connected to the projector.
with Auto Sync adjustment, use manual ad-
justments. (See page 46.)
Description