Quick Start; Setup And Projection - Eiki DLP EIP-4200 Owner's Manual

Quick Start

This section shows the basic operation (projector connecting with the computer). For details,
see the page described below for each step.

Setup and Projection

In this section, connection of the projector and the computer is explained using one example.
1. Place the projector facing a wall or a screen
2. Connect the projector to the computer and plug the power
cord into the AC socket of the projector
When connecting equipment other than a computer, see pages
22 and 23.
3. Open the lens shutter fully and then turn the projector on
16
3
STANDBY/ON
button
8
5
KEYSTONE button
Adjustment buttons
5
(P/R/O/Q)
6
INPUT buttons
4
Zoom ring
4
Focus ring
4 HEIGHT
ADJUST lever
On the projector On the remote control
8
STANDBY button
3
ON button
6
COMPUTER button
5
Adjustment buttons
(P/R/O/Q)
5
KEYSTONE button
_P. 18
_PP. 21, 24, 25
_P. 26