Chapter 3 Initial Configuration; Gateway Management Interface - Cisco VG30D User Manual

3
C H A P T E R
Initial Configuration

Gateway Management Interface

To configure the Cisco VG30D Voice Gateway, you must now connect the Ethernet Port to the IP
Network, but do NOT connect to the E1 telephony ports yet.
You need a standard Web browser application to configure the Cisco VG30D Voice Gateway unit. Ensure
that your browser is set to accept cookies and always check for newer versions of stored pages.
You can set configuration parameters by using a simple intuitive menu as shown in Figure 3-1.
Cisco VG30D Voice Gateway User Guide
3-1
OL-19276-01