Craft Port Management
Craft Port Functionality & Operation
The Craft Port provides a secondary means of managing the Cisco VG30D Voice Gateway. Use it for
presentation of self-test results and for basic IP address parameter setup. It also provides a means by
which low-level functions and diagnostics may be accessed during normal operation.
The Craft Port would normally only be used to set up a New Management IP Address, when the unit
cannot be accessed by using the web browser-based Gateway Management Interface.
Note
Although Craft Port facilities are available with the unit in normal operation, the functions are
service-affecting. Take the Cisco VG30D Voice Gateway out of service before accessing these Craft Port
facilities.
Access
You can access the Craft Port by using a dumb terminal or terminal emulator on a computer by using the
RJ45 crossover stub cable that is supplied with the Cisco VG30D Voice Gateway unit.
Communication settings: RS232, 9600 baud, 8 bit, no parity, 1 stop bit
Contact your support provider for instructions.
OL-19276-01
A P P E N D I X
Cisco VG30D Voice Gateway User Guide
D
D-1