Appendix; Approvals, Safety Instructions, And Statutory Information; Connection To Mains Voltage Supply; Replacing The Mains Fuse - Cisco VG30D User Manual

Approvals, Safety Instructions, and
Statutory Information
This information must be read prior to use of this equipment and overrides as appropriate any
information in respect of connection and use of the equipment.
Address any enquiries regarding regulatory aspects of this equipment to Cisco Systems, Inc.

Connection to Mains Voltage Supply

The wires in the mains lead are coloured in accordance with the following code. As the colours of the
wire in the mains lead may not correspond with the coloured markings in the plug, proceed as follows:
The wire coloured GREEN and YELLOW must be connected to the terminal marked E or by the earth
Step 1
symbol or coloured GREEN, or GREEN and YELLOW.
Step 2 The wire coloured BLUE must be connected to the terminal marked N or coloured BLACK or BLUE.
Step 3 The wire coloured BROWN must be connected to the terminal marked L or coloured RED or BROWN.

Replacing the Mains Fuse

For continued protection against the risk of fire and shock hazard, replace fuses only with the same
Warning
type and rating.
Fuse type: T2A H 250V

Product Servicing

This product contains no user-serviceable parts. Any attempt by non-qualified personnel to gain access
inside the product enclosure will compromise the terms of the approval quoted above. Should such
access be attempted, liability will not be accepted if the equipment is shown subsequently not to be in
compliance with the terms of approval.
OL-19276-01
A P P E N D I X
Cisco VG30D Voice Gateway User Guide
A
A-1