Quick Configuration; Dpnss Configuration; Basic Settings - Cisco VG30D User Manual

DPNSS Configuration

•

Quick Configuration

To configure any of the preceding preset applications, perform the following procedure:
Select Configuration and then Applications.
Step 1
Select the required application and the relevant settings will display.
Step 2
Complete the fields as required.
Step 3
Select Submit and the settings will change.
Step 4
Select Close to return to the Menu.
Step 5
Note
DPNSS Configuration

Basic Settings

Note Any changes that are made to the basic settings will cause the Cisco VG30D Voice Gateway to
temporarily deactivate the DPNSS Port. A warning will tell you that calls in progress will be lost, and
confirmation is requested before changes are submitted.
Options are:
•
•
•
•
Cisco VG30D Voice Gateway User Guide
4-4
PBX
Any active ports temporarily will get deactivated while the changes are being made to the basic
configuration. Calls in progress will get lost, and service will get interupted.
Activate or deactivate DPNSS Port
Puts the DPNSS port (Port 2) in or out of service.
You cannot activate the port if no channels are commissioned.
Note
Channel Commissioning (for up to 30 channels)
All channels are set to In Use when the Cisco VG30D Voice Gateway is supplied. Channels that are
not required may be decommissioned
DPNSS A/B Orientation
Ensure the Cisco VG30D Voice Gateway is set to the opposite A/B Orientation from that of the Port
on the PBX or other equipment to which the Cisco VG30D Voice Gateway is connected.
X or Y Channel Orientation
Ensure Channel Orientation is set opposite to the orientation for each of the Channels on the PBX
or other SCN equipment with which the Cisco VG30D Voice Gateway is communicating.
Chapter 4
.
Management and Configuration
OL-19276-01