▀ Configuring the System to Perform as a Femto Network Gateway
Initial Configuration
Set local system management parameters by applying the configuration example in the section
Context.
Modifying the Local Context
Use the following configuration example to create a management interface, configure remote access capability, and set
the default subscriber in the local context:
configure
context local
interface <mgmt_interface_name>
ip address <ip_address> <subnet_mask>
exit
server sshd
subsystem sftpd
exit
server telnetd
exit
subscriber default
exit
administrator <name> encrypted password <password> ftp
aaa group default
exit
gttp group default
exit
ip route 0.0.0.0 0.0.0.0 <gateway_ip_addr> <mgmt_interface_name>
exit
port ethernet <slot_number/port_number>
no shutdown
▄ Cisco ASR 5000 Series Femto Network Gateway Administration Guide
40
Femto Network Gateway Configuration
Modifying the Local
OL-24872-01