Data Call - Cisco VG30D User Manual

Data Call

DPNSS 188 Section
25
26
29
31
36
37
48
49
Data Call
Compliance table for a PBX that supports the circuit switched data call
Service Variant
Originate Circuit Switched-Data
Calls?
Cisco VG30D Voice Gateway User Guide
9-4
Feature Description
Night service
Centralised operator
Add on conference
Call back when next used
Call back messaging
Loop avoidance
Number Presentation Restriction A-party number restriction only
Non-Specified Information
Message
Comply
Yes
Chapter 9 DPNSS Compliance Tables
Comments (specific to CUCM
interworking)
Partial support. Supported
when PBX provides diversion
number. No provision for
configuring a pre-set Night
Service Answer Point number.
Partial support. The following
BTNR 188 features get
supported: 11, 12, 13, 14 & 22.
Standard conferencing
functionality - supported
between the Legacy and IP
environments.
Partial support. Can only be
support where a single link exists
between Cisco Unified
Communications Manager and
DPNSS end point
Some PBXs (for example, Mitel
PBXs) use this service for
setting/clearing Message
Waiting Indicators. The Cisco
VG30D Voice Gateway supports
this usage.
Configurable, default set to 10
Fully supported in Transit Mode
NSIMs get filtered out
Note
when calls are transited
through Cisco Unified
Communications
Manager.
Comment
OL-19276-01