Table of Contents
Advertisement
Provisioning Field Reference
Configuration Profile Parameters
Configuration Profile Parameters
Cisco Small Business IP Telephony Devices Provisioning Guide
The following table defines the function and usage of each parameter in the
Configuration Profile Parameters section under the Provisioning tab.
Parameter Name
Provision_Enable
Resync_On_Reset
Resync_Random_Delay
Description and Default Value
Controls all resync actions independently of
firmware upgrade actions. Set to yes to
enable remote provisioning.
The default value is Yes.
Triggers a resync after every reboot except
for reboots caused by parameter updates
and firmware upgrades.
The default value is Yes.
The maximum value for a random time
interval that the device waits before making
its initial contact with the provisioning
server. This delay is effective only on the
initial configuration attempt following
device power-on or reset. The delay is a
pseudo-random number between zero and
this value.
This parameter is in units of 20 seconds; the
default value of 2 represents 40 seconds.
This feature is disabled when this
parameter is set to zero.
This feature can be used to prevent an
overload of the provisioning server when a
large number of devices power-on
simultaneously.
The default value is 2 (40 seconds).
4
82
Advertisement
Table of Contents
