Internal Error Codes - Cisco SPA901-UK - Small Business Pro Provisioning Manual

Provisioning Field Reference

Internal Error Codes

Internal Error Codes
Cisco Small Business IP Telephony Devices Provisioning Guide
Parameter Name
UID1
UID2
ISCUST
The IP Telephony Device defines a number of internal error codes (X00–X99) to
facilitate configuration in providing finer control over the behavior of the unit under
certain error conditions.
Parameter Name
X00
X20
X40
X60
Description and Default Value
The contents of the Line 1 User_ID configuration
parameter (Firmware 2.0. 1 1 and above).
The contents of the Line 2 User_ID configuration
parameter (Firmware 2.0. 1 1 and above).
Value=1 if unit is customized, 0 otherwise;
customization status viewable on WebUI Info page.
Description and Default Value
Transport layer (or ICMP) error when sending a SIP
request.
SIP request times out while waiting for a response.
General SIP protocol error (for example, unacceptable
codec in SDP in 200 and ACK messages, or times out
while waiting for ACK).
Dialed number invalid according to given dial plan.
4
92