Table of Contents
Advertisement
Provisioning Field Reference
General Purpose Parameters
General Purpose Parameters
Cisco Small Business IP Telephony Devices Provisioning Guide
Parameter Name
Log_Upgrade_Success_Msg
Log_Upgrade_Failure_Msg
The following table defines the function and usage of each parameter in the
General Purpose Parameters section of the Provisioning tab.
Parameter Name
GPP_SA, GPP_SB, GPP_SC,
GPP_SD
GPP_A through GPP_P
Description and Default Value
The syslog message that is issued after a
firmware upgrade attempt completes
successfully.
The default value is $PN $MAC -- Successful
upgrade $SCHEME://$SERVIP:$PORT$PATH --
$ERR.
The syslog message that is issued after a failed
firmware upgrade attempt.
The default value is $PN $MAC -- Upgrade
failed: $ERR.
Description and Default Value
Special purpose provisioning parameters,
designed to hold encryption keys and
passwords. To ensure the integrity of the
encryption mechanism, these parameters must
be kept secret. Therefore these parameters are
not displayed on the device configuration web
page, and they are not included in the
configuration report sent in response to a SIP
NOTIFY command.
The default value is (empty).
General purpose provisioning parameters.
These parameters can be used as variables in
provisioning and upgrade rules. They are
referenced by prepending the variable name
with a '$' character, such as $GPP_A.
The default value is (empty).
4
88
Advertisement
Table of Contents
