Table of Contents
Advertisement
Creating Provisioning Scripts
Proprietary Plain-Text Configuration File
Cisco Small Business IP Telephony Devices Provisioning Guide
URL Syntax
Standard URL syntax is used to specify how to retrieve configuration files and
firmware loads in Profile_Rule* and Upgrade_Rule parameters, respectively. The
syntax is as follows:
[ scheme:// ] [ server [:port]] filepath
Where scheme is one of the following values:
•
tftp
•
http
•
https
If scheme is omitted, tftp is assumed. The server can be a DNS-recognized host
name or a numeric IP address. The port is the destination UDP or TCP port number.
The filepath must begin with the root directory (/); it must be an absolute path.
If server is missing, then the tftp server specified through DHCP (option 66) is
used.
If port is missing, then the standard port for the specified scheme is used (tftp
uses UDP port 69, http uses TCP port 80, https uses TCP port 443).
A filepath must be present. It need not necessarily refer to a static file, but can
indicate dynamic content obtained through CGI.
Macro expansion applies within URLs. The following are examples of valid URLs:
/$MA.cfg
/cisco/spa021025.bin
192.168.1.130/profiles/init.cfg
tftp://prov.call.com/cpe/cisco$MA.cfg
http://neptune.speak.net:8080/prov/$D/$E.cfg
https://secure.me.com/profile?Linksys
2
44
Advertisement
Table of Contents
