Cisco SPA901-UK - Small Business Pro Provisioning Manual page 59

Creating Provisioning Scripts
Data Types
Cisco Small Business IP Telephony Devices Provisioning Guide
Segment 2: On=0.2s, Off=0.2s
Segment 3: On=0.2s, Off=0.2s
Segment 4: On=1.0s, Off=4.0s
Total Ring Length = 60s
• FreqScript—A mini-script that specifics the frequency and level parameters
of a tone. Up to 127 characters. Syntax:
F @L [,F @ [,F @L
1 1 2 L2 3
Hz (unsigned integers only) and L
up to 1 decimal places). White spaces before and after the comma are
allowed (but not recommended).
Example 1—Call Waiting Tone:
440@-10
Number of Frequencies = 1
Frequency 2 = 440 Hz at –10 dBm
Example 2—Dial Tone:
350@-19,440@-19
Number of Frequencies = 2
Frequency 1 = 350 Hz at –19 dBm
Frequency 2 = 440 Hz at –19 dBm
• ToneScript—A mini-script that specifies the frequency, level and cadence
parameters of a call progress tone. May contain up to 127 characters.
Syntax: FreqScript;Z
CadScript except that each on/off segment is followed by a frequency
components parameter: Z
[,on /off /f [,on
i,4 i,4 i,4
n [+n ]+n [+n [+n
1 2 3 4
components given in the FreqScript are used in that segment; if more than
one frequency component is used in a segment, the components are
summed together.
[,F @L [,F @L [,F @L
3 4 4 5 5 6
–L are corresponding levels in dBm (with
1 6
[;Z ]. The section Z
1 2
= D (on /off
1 1 i,1
/off /f [,on /off
i,5 i,5 i,5 i,6 i,6
[+n ]]]]] and 1 < n < 6 indicates which of the frequency
5 6 k
]]]]], where F –F are frequency in
6 1 6
is similar to the S
1 1
/f [,on /off /f [,on
i,1 i,1 i,2 i,2 i,2
/f ]]]]]), where fi,j =
i,6
2
section in a
/off /f
i,3 i,3 i,3
58