Registering New Permit Ids - Kyocera KM-3035 Operation Manual

Registering New Permit IDs

* You can register up to 5 numbers as Permit IDs in this fax.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode
settings.
1
Press the "Register" key. The Registration Select screen
will appear.
(inch)
(metric)
2
Press the "Password check" key.
(inch)
(metric)
3
Press the "Permit ID No." ["Permit ID nr."] key.
(inch)
(metric)
Section 5 Other Features of this Fax
4
Press an unregistered key.
* The information will be displayed for all keys that have
already been registered.
(inch)
(metric)
5
Use the keypad to enter the desired 4-digit Permit ID.
* If you want to change the entered number, use the " "
and/or " " keys to move the cursor to the desired
location.
(inch)
(metric)
6
Press the "Confirm" key.
The message display will return to the same screen as
was displayed in step 4. If you want to continue
registering other Permit IDs, repeat steps 4 through 6. If
you are finished registering Permit IDs, press the Reset
key.
5-45