Accessing The Report Selection Screen When Restricted Access Is Turned On - Kyocera KM-3035 Operation Manual

4
The Application screen will appear. Perform the desired
procedure.
(inch)
(metric)
Section 5 Other Features of this Fax
Accessing the Report Selection Screen
When Restricted Access is Turned ON
When Restricted Access is turned ON, perform the following
procedure in order to access the Report Selection screen (available
when you press the "Print Reports" key) and thereby print out the
corresponding reports.
* The reports that are available for print out will depend on
whether you enter an ID-code or the registered administrator
number.
If you enter an ID-code...Only the Activity Report, Confirmation
Report and Restricted Access Report are available
If you enter the administrator number...All reports are available
If you enter an ID-code...
1
Use the keypad to enter a viable ID-code (between 1 and 8
digits).
(inch)
(metric)
2
Press the "Enter" key.
3
Press the "Print Report" key.
(inch)
(metric)
5-61