Using A Program Key - Kyocera KM-3035 Operation Manual

Fax system (j) operation guide rev-1
Hide thumbs Also See for KM-3035:
Table of Contents

Advertisement

7
Enter the abbreviated number of an unregistered
speed-dial key (001 - 600).
* Once a 3-digit number is entered, that number may be
changed using the "+" and "-" keys.
(inch)
(metric)
8
Press the "Close" key.
9
Once you are finished modifying all of the items that you
want, press the "OK" key.
The message display will return to the same screen as
was displayed in step 3.
If you want to continue modifying other program keys,
repeat steps 3 through 9. If you are finished deleting
program keys, press the Reset key.
Section 5 Other Features of this Fax

Using a Program Key

1
If the operation involves the transmission of documents,
set the documents you want to transmit. If it involves a
polling reception, go directly to step 5.
2
If you want to change the transmission conditions, such
as the resolution and contrast, press the "TX setting" key.
If you do NOT want to change the current conditions, go
directly to step 5.
3
Press the key that corresponds to the desired item and
change the information as desired. (To change each
transmission condition, refer to pages 2-3 and 2-4.)
4
Once you are finished changing transmission conditions,
press the "One touch destinat." key.
(inch)
(metric)
5-39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-4035Km-5035

Table of Contents