Kyocera KM-3035 Operation Manual page 193

CODE CAUSE AND/OR PROCEDURE FOR CORRECTION
U03600 The transmitting party's FAX is one of our models and an F-Code Based Bulletin Board Reception was attempted
in order to receive documents from that party's F-Code Box, but was unsuccessful because the F-Code password
that you entered did not match the one registered in the transmitting party's FAX.
U03700 An F-Code Based Bulletin Board Reception was attempted in order to receive documents from the other party, but
was unsuccessful because the other party's FAX does not have F-Code Based Bulletin Board Transmission
capabilities or because there were no documents stored in the corresponding box.
U04000 The destination FAX is one of our models and an F-Code Based Confidential Transmission was attempted in order
to transmit documents to that party's F-Code Box, but was unsuccessful because the F-Code Box number that you
entered was not registered in the destination party's FAX.
U04100 A transmission to a destination party's box (ex. F-Code Box) was attempted, but was unsuccessful because the
destination party's FAX does not have F-Code Based Confidential Reception capabilities.
U04200 Encryption Transmission was attempted, but was unsuccessful because the Encryption Box was not registered in
the other party's FAX.
U04300 Encryption Transmission was attempted, but was unsuccessful because the other party's FAX does not possess
Encryption Communication capabilities.
U04400 Encryption Transmission was attempted, but was unsuccessful because the Encryption Keys did not match.
U04401 Encryption Transmission was attempted, but the other party was not dialed because the designated Encryption
Key is not registered in your unit.
U04500 Encryption Reception was attempted, but was unsuccessful because the Encryption Keys did not match.
U05100 Transmission was attempted, but was unsuccessful because Password Check Communication was turned ON in
your unit and the necessary password did not match. Check with the destination party.
U05200 A transmission was attempted by the other party, but was unsuccessful because Password Check Communication
was turned ON in your unit and the necessary password did not match.
U05300 Transmission was attempted, but was unsuccessful because Password Check Communication was turned ON in
the destination party's FAX and the necessary password did not match. Check with the destination party.
U09000 Communication was attempted but, but was unsuccessful because the other party's FAX does not match the
communication protocol in use (the other party is using a G2 facsimile).
U12000 An F-Code Based Relay Broadcast Transmission command was received, but all the data to be transmitted was
not received because the memory in your FAX machine has become full. Check the contents of your machine's
memory and, after you have created sufficient space in memory, have the initial transmitting station perform the
transmission operation again.
Section 10 Reference Information
10-9