Table of Contents
Advertisement
32
ATM LANE Parameters Configuration
To view and edit ATM LANE parameters, select LANE Parameters on the ATM
LEC Setup screen.
LANE ATM Address
ATM Forum: C1
The ATM address for the ELAN can be assigned manually or automatically. If you
select Automatic, the address is constructed using a 13 byte address prefix provided
by the ATM switch, the 6 byte burned-in MAC address of the STS16-20RM, and a
1 byte selector. The selector is used to distinguish between different VAPs. If you
select Manual, you will be prompted for an address. If ILMI is disabled, the ATM
address must be specified manually.
The default value is Automatic.
LAN Emulation Server (LES) Address
ATM Forum: C9
The ATM address of the LES for this ELAN. The address specified must be
different from all client ATM addresses. There is no default address.
SmartStack SSIM-A2-01/SSIM-A8-01
Console Configuration
Advertisement
Table of Contents
Need help?
Do you have a question about the SSIM-A2-01 and is the answer not in the manual?