Navigating Within The Menus - Cabletron Systems SSIM-A2-01 Installation And User Manual

•
To refresh the console panel at any time, press
•
If you are administering switches in a stack, many of the console screens will
prompt for a box number. Enter the number of the box you want to administer
to continue. The box that you are physically connected to is highlighted.
•
The console automatically returns to the greeting screen after five minutes of
inactivity. Five minutes is the default value. The time can be changed at the
Console Configuration menu. The Console Configuration menu is within
the Configuration menu, under the main menu.
•
For protection against inadvertent or unauthorized access to configuration
screens, you can set a password that users must enter at the greeting screen. If
no password is configured, just press

Navigating within the Menus

Use the arrow keys (also referred to as cursor keys) to move the highlight over a
selection. If the selection is a menu, pressing the
of information; if the selection is a command, such as Reset, pressing the
key initiates that function.
A heading with three "dots" after it means that when that heading is selected, a
submenu or screen is displayed.
Unless specified differently, all screens or menus are accessed in the same way.
SmartStack SSIM-A2-01/SSIM-A8-01
.
CTRL-L
and the main menu is presented.
ENTER
key displays a new screen
ENTER
17
ENTER
Console Configuration