Modifying Fields And User Privileges - Cabletron Systems MMAC-Plus 9M426-02 Reference Manual

Local management appendix dual hsim switch module

Hide thumbs Also See for MMAC-Plus 9M426-02:

Table of Contents

9M426-02 Module Speciﬁc

Information

Introduction

This appendix contains Local Management information that is speciÞc to the

9M426-02 Dual HSIM Switch Module.

This module has two slots for two High Speed Interface Module (HSIM)

interfaces (not included and may be purchased separately). These HSIMs operate

in various modes (ATM, FDDI, WAN, etc.), depending on the HSIM installed in

the module.

HSIM UserÕs Guides, in Portable Document Format, are available from the

NOTE

World Wide Web at the following site: http://www.cabletron.com/

Modifying Fields and User Privileges

To modify Þelds on this module, you must have read-write or super-user

privileges. If you have read-only privileges, you can view information; however,

you cannot modify any Þelds. For more information about user privileges and

community names, refer to the SmartSwitch 9000 Module Local Management UserÕs

Guide.

Appendix

Table of Contents

Do you have a question about the MMAC-Plus 9M426-02 and is the answer not in the manual?

Smartswitch 9000