Enterasys Matrix E6 5G102-06-G Install Manual page 27

ELECTRICAL HAZARD: Only qualified personnel should install the module.
NOTE: Read the Release Notes shipped with the module to check for any exceptions to
the supported features and operation documented in this guide.
This chapter provides the instructions to install the 5G102-06 and 5G106-06 modules. A Phillips
screwdriver is required to install options into the module. Follow the order of the sections listed
below to correctly install the module.
• Unpacking the Module
• Installing Options into the 5G106-06
• Installing the Module into the 5C105 MATRIX E5 Chassis
• Connecting to the Network
• Completing the Installation
(Section 3.1)
(Section
(Section 3.4)
(Section 3.7)
3.2)
(Section
Installation
3.3)
Installation
3
3-1