Show Snmp Target; Show Snmp Filter - 3Com 3CRWE876075 User Manual

Example
Enterprise AP#show snmp group-assignments
GroupName :RWPriv
UserName :chris
Enterprise AP#
Enterprise AP#

show snmp target

This command displays the SNMP v3 notification target settings.
Syntax
show snmp target
Command Mode
Exec
Example
Enterprise AP#show snmp target
Host ID : mytraps
User : chris
IP Address : 192.254.2.33
UDP Port : 162
=============================
Enterprise AP#

show snmp filter

This command displays the SNMP v3 notification filter settings.
Syntax
show snmp filter [filter-id]
• filter-id - A user-defined name that identifies an SNMP v3 notification
filter. (Maximum length: 32 characters)
Command Mode
Exec
5-57
Using the Command Line Interface