3Com 3CRWE876075 User Manual page 119

Default Setting
admin
Command Mode
Global Configuration
Example
Enterprise AP(config)#username bob
Enterprise AP(config)#
password
After initially logging onto the system, you should set the password. Remember
to record it in a safe place. Use the no form to reset the default password.
Syntax
password <password>
no password
password - Password for management access.
(Length: 3-16 characters, case sensitive)
Default Setting
null
Command Mode
Global Configuration
Example
Enterprise AP(config)#password
Enterprise AP(config)#
ip ssh-server enable
This command enables the Secure Shell server. Use the no form to disable the
server.
Syntax
ip ssh-server enable
no ip ssh-server
Default Setting
Disabled
5-17
Using the Command Line Interface