802.1X Session-Key-Refresh-Rate; 802.1X Session-Timeout - 3Com 3CRWE876075 User Manual

802.1x session-key-refresh-rate

This command sets the interval at which unicast session keys are refreshed for
associated stations using dynamic keying.
Syntax
802.1x session-key-refresh-rate <rate>
rate - The interval at which the access point refreshes a session key.
(Range: 0 - 1440 minutes)
Default Setting
0 (Disabled)
Command Mode
Global Configuration
Command Usage
Session keys are unique to each client, and are used to authenticate a client
connection, and correlate traffic passing between a specific client and the
access point.
Example
Enterprise AP(config)#802.1x session-key-refresh-rate 5
Enterprise AP(config)#

802.1x session-timeout

This command sets the time period after which a connected client must be
re-authenticated. Use the no form to disable 802.1X re-authentication.
Syntax
802.1x session-timeout <seconds>
no 802.1x session-timeout
seconds - The number of seconds. (Range: 0-65535)
Default
0 (Disabled)
Command Mode
Global Configuration
5-73
Using the Command Line Interface