3Com 3CRWE876075 User Manual page 136

C 5: C L
HAPTER OMMAND INE
Default Setting
Command Mode
Example
Enterprise AP(config)#logging host 1 10.1.0.3
Enterprise AP(config)#
logging console
This command initiates logging of error messages to the console. Use the no
form to disable logging to the console.
Syntax
Default Setting
Command Mode
Example
Enterprise AP(config)#logging console
Enterprise AP(config)#
logging level
This command sets the minimum severity level for event logging.
Syntax
Default Setting
Command Mode
I
NTERFACE
None
Global Configuration
[no] logging console
Disabled
Global Configuration
logging level <Emergency | Alert | Critical | Error | Warning | Notice |
Informational | Debug>
Informational
Global Configuration
5-34